Manual AB Glue Gun with Dispensing Gun - Compatible with 50ml 10:1 & 4:1 AB Glue Cartridges & Mixing Tubes - Perfect for DIY Crafts, Home Repairs, and Industrial Bonding Projects

Product Description

Product information: Basic parameters Net weight: 0.25kg Name: 50ml manual glue gun Thrust: 600kgs Model: cgmp50-50-10:1 / 4:1 Structure: left and right structure Material: Nylon Matching bottle: 50ml-10:1 / 4:1 Dimensions: see detail drawing Power source: Manual Application: dental materials Practical plastic bottle: 50ml 10:1pbt smooth surface 50m10:1 PBT matte 50ml 10:1 smiling face PBT The installation method of AB glue gun is as follows: The product is easy to operate, convenient and durable. It is specially used to smear or drip various two-component adhesives or coatings, which can completely solve the problem of uneven mixing of two-component adhesive products. Step 1: insert the push rod from the front. First push up the clamping rod at the tail of the glue gun, and then insert the push rod from the front end until the push rod is completely inserted into the glue gun. Step 2: test whether the push rod is installed correctly. After installation, hold the handle of the gun with your hand, and then pinch the wrench tightly. Every time you pinch, the push rod should be pushed forward one step. If not, please check whether it is installed properly. Step 3: normal gluing. Push the push rod back to the end, open the button on the top of the glue gun upward, and then remove the outer plug at the end of the UV glue. Step 4: install the UV cartridge into the gun Be sure to card in place, and then press the top button card, you can glue. Step 5: remove the outer plug from the front end of the UV cartridge to apply glue. Remove the plug in front of the rubber barrel, install the mixing pipe, and it can work normally.